User Manual Q&AAnswer
Jan 24, 2025 - 04:59 AM
To change the voltage setting on the Steamfast SF-717 Mini Steam Iron, please follow these steps:
1. Locate the Voltage Selector, which is recessed inside a slot at the rear of the Main Body of the iron.
2. Note the white open notch in the middle of the Voltage Selector.
3. Find a tool with a fine tip, such as a pen.
4. Carefully insert the tip of the pen into the white notch of the Voltage Selector.
5. Slide the Voltage Selector to the right, towards the 220-240V label.
6. Be sure to move the Voltage Selector as far to the right as possible for the voltage setting to take effect correctly. The Voltage Selector should appear as shown in the manual.
7. The unit is now ready for use in a 220V region. If you need to set the unit back to 100V, simply reverse steps 4 and 5, sliding the Voltage Selector as far to the left (towards the 100-127V label) as possible.
Please note that it is important to confirm the voltage available at each location before using the iron. If you are unsure about the voltage in your region, it is recommended to consult a qualified electrician for assistance.
Add New Comment