User Manual Q&AAnswer
Jan 24, 2025 - 04:40 AM
To connect your BenQ MP780ST Digital Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer. If your computer has a VGA port, use a VGA cable. If it has an HDMI port, use an HDMI cable.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer and projector.
7. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system.
8. Adjust the projector settings, if necessary, to ensure the best display quality.
For more detailed instructions and illustrations, please refer to the "Connecting the Projector" section in the BenQ MP780ST Digital Projector User Manual, which can be found at the provided link.
Add New Comment