User Manual Q&AAnswer
Jan 24, 2025 - 04:41 AM
To install the ITC Anya Courtesy Light, please follow these steps:
1. Disconnect power: Before starting the installation process, make sure to disconnect the power source to avoid any accidents.
2. Account for all parts: Ensure that you have received all the necessary components and discard any packing materials to prevent hazards, especially if there are children around.
3. Fuse protection: It is recommended to add fuse protection to the positive (+) input for added safety.
4. Determine installation location: Choose the desired location for your light and drill a ½" hole to accommodate the light fixture.
5. Wiring: Pull the unit's wiring through the drilled hole and connect it according to the provided wiring diagram.
6. Secure the housing: Use the provided screws to xxxx in the housing, ensuring it is firmly attached.
7. Install the light: Align the tab on the light with the gap in the housing and press down on the opposite corner until it snaps into place.
8. Attach the bezel: Push the bezel into place to complete the installation.
9. Wiring diagram: Refer to the wiring diagram provided in the manual to correctly wire the light.
For any further warranty information or returns, please visit the ITC website at www.itc-us.com/warranty-return-policy.
Note: It is essential to read the entire instruction manual carefully before proceeding with the installation to ensure proper usage and safety precautions.
Add New Comment