User Manual Q&AAnswer
Jan 24, 2025 - 04:38 AM
To connect your NEC LT280 HD Digital Portable Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and wait for it to boot up.
6. Turn on the projector by pressing the power button.
7. Use the projector's remote control or control panel to select the appropriate input source (VGA or HDMI).
8. Adjust the projector's focus and zoom settings as needed.
9. On your computer, go to the display settings and select the appropriate resolution and display mode for the projector.
10. You should now see your computer's display projected onto the screen or surface connected to the projector.
For more detailed instructions and troubleshooting tips, please refer to the NEC LT280 HD Digital Portable Projector User's Manual provided in the link above.
Add New Comment