User Manual Q&AAnswer
Jan 24, 2025 - 04:34 AM
To connect your Epson PowerLite 96W 3LCD Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the computer video port on your projector. It is labeled "Computer 1" or "Computer 2" depending on the model.
3. Connect one end of the VGA cable (not included) to the computer video port on the projector.
4. Locate the video output port on your computer. It is usually a VGA or HDMI port.
5. Connect the other end of the VGA cable to the video output port on your computer.
6. If your computer has an HDMI output port, you can use an HDMI cable (not included) instead of a VGA cable for a digital connection.
7. Once the cables are connected, turn on your computer and projector.
8. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system.
9. If necessary, adjust the focus and zoom on the projector to optimize the image quality.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 96W 3LCD Projector User's Guide, specifically the section on "Connecting to a Computer" (page 27) in the provided manual.
Add New Comment