User Manual Q&AAnswer
Jan 24, 2025 - 04:32 AM
To connect your Epson PowerLite 435W Multimedia Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the Computer port on the back of the projector.
4. Connect the other end of the VGA cable to the VGA port on your computer.
5. Turn on your computer.
6. Turn on the projector by pressing the Power button on the control panel or remote control.
7. Wait for the projector to warm up and display the startup screen.
8. On your computer, go to the display settings. The method to access display settings may vary depending on your operating system.
9. Select the appropriate display mode for your needs. You can choose to duplicate your computer screen on the projector or extend your desktop to the projector.
10. Adjust the projector's focus and zoom if necessary using the controls on the projector or remote control.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 435W Multimedia Projector User's Guide provided in the link you shared.
Add New Comment