User Manual Q&AAnswer
Jan 24, 2025 - 04:11 AM
To enroll the RISCO RWX78M3 2 Way Slim Contact Detector into your RISCO Group 2-way wireless system, follow these steps:
1. Set the receiver to Learn mode.
2. Open the detector plastic cover from the bracket.
3. Remove the battery divider.
4. Reattach the detector to the bracket.
5. Wait at least 3 seconds to send a WRITE message.
6. Successful learning will be indicated by a confirmation message that indicates the detector allocation in the system.
Note: Alternatively, you can perform device allocation (enrollment) by entering the detector’s 11-digit serial number. Make sure to use the serial number of the Main Unit by scanning the QR sticker on the package via the HandyApp application.
For more detailed instructions and illustrations, please refer to the RISCO RWX78M3 2 Way Slim Contact Detector Instruction Manual.
Add New Comment