User Manual Q&AAnswer
Jan 24, 2025 - 04:09 AM
To assemble the SIP Industrial 07916 20 Litre Valeting Machine, follow these steps:
1. Fit the attachment holder on to the base of the container and secure it with a xxxx . Make sure the castors are fitted to the front of the base.
2. Repeat the process for the other attachment holder.
3. Push the castors into the attachment holders.
4. Fit the detergent tank holder to the opposite side of the base and secure it with screws.
5. Line up the hole in the middle of the wheel with the axle on the detergent tank holder and press the wheel over the axle until it is fully in position.
6. Fit the detergent tank into the detergent tank holder.
7. Connect the detergent outlet pipe to the rear of the valeting machine by lining up the tabs with the cut-outs on the pipe connector, pushing the connector in, and turning it clockwise to lock it in place.
Please refer to the manual for visual illustrations and additional information on the assembly process.
Add New Comment