How do I assemble the Bureau Hout BM Living Computer Table? (Bureau Hout BM Living Computer Table Instruction Manual)

Answer

manuals.plus

Jan 24, 2025 - 04:06 AM

To assemble the Bureau Hout BM Living Computer Table, please follow these steps:

1. Start by ensuring you have all the necessary parts and fittings as specified in the manual. If there are any defective or missing parts, please contact the seller immediately.

2. Find a spacious surface to assemble the table and avoid placing the unwrapped product directly on the ground to prevent damage.

3. Wear gloves during the assembly process to avoid scratches from any sharp edges.

4. Match the corresponding part and fitting based on the part number in the manual. If the part does not match with the fitting, check the piece as specified in the manual.

5. Loosely align all screws with the corresponding pre-drilled holes on the boards and poles. Do not fully tighten the screws at this stage.

6. Once all screws are loosely aligned, adjust the position of the boards if the holes on the boards and poles are not aligned. Slightly loosen all screws and make necessary adjustments. The diameter of the holes on the pipes is slightly larger than that of the bolts, allowing for adjustment.

7. After adjusting the boards, tighten the screws one by one, ensuring a secure fit. Periodically inspect xxxx tightness while the product is in use and retighten if necessary to maintain structural integrity.

If you encounter any issues during the assembly process or if the adjustments do not work, please contact the seller for further assistance and alternative solutions.

Please note that children are not allowed to assemble the product, and it is important to keep small parts out of their reach to prevent any potential hazards.