User Manual Q&AAnswer
Jan 24, 2025 - 03:36 AM
To install and adjust the MIO Bendant Lamp, please follow these steps:
1. Always handle the lamp from the central cutout to avoid damaging the petals.
2. Plug in the lamp and secure the cord to the ceiling or use a hardwire swag set.
3. Insert the lamp shade into the lamp holder through the central cutout.
4. xxxx the plastic ring into the lamp holder to fasten the shade.
5. Before bending the petals, the shade will resemble the illustration provided.
6. Start by gently pushing down the outer petals with your thumb in the desired direction. It is recommended to keep the composition symmetrical to maintain the lamp's straightness and balance.
7. Continue bending the outer petals until they are in the desired position.
8. To bend the inner petals, push or pull on the selected petal while holding the corresponding outer petal in place.
9. Repeat the process around the shade to keep it balanced.
10. Once you are satisfied with the petal positions, the installation and adjustment are complete.
Please note that it is important not to re-bend or re-adjust the petals more than five times to avoid breaking them.
If you have any further questions or need assistance, you can contact MIO via email at infol@mioculture.com or call their US Toll Free number 1-888-563-3916 or International number +1(215) 925-9359.
Add New Comment