User Manual Q&AAnswer
Jan 24, 2025 - 03:19 AM
To install and assemble the VONYX DB20 Studio and Gaming Table with RGB Lighting, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting installation, read the entire instruction manual to familiarize yourself with the process and safety precautions.
2. Ensure that you have received all the parts listed in the component checklist. If any parts are missing or faulty, contact your place of purchase for a replacement.
3. Make sure the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
4. Use safety gear and proper tools during installation. It is recommended to have professionals install this product.
5. Clean the surface where you intend to stick the light strip. This will ensure proper adhesion.
6. Peel off the backing strip from the 3M adhesive tape on the light strip.
7. Press and hold the light strip firmly against the surface to secure it in place.
8. Remove the tab from the battery compartment of the remote control.
9. Connect the USB cable to the USB port of the desired device.
10. To change the battery of the remote control, locate the battery compartment on the narrow side of the remote control. Pull it out as shown.
11. Remove the empty battery and insert a 3V battery, type CR2025, with the positive terminal pointing upwards.
12. Place the battery compartment back in the remote control so that it locks in place.
13. The remote control has various functions, including on/off switch, white light (RGB mixed color), flash (jump change 7 colors), strobe (gradual change 3 colors), fade (gradual change 7 colors), smooth (jump change 3 colors), control panel for color selection (12 mixed colors), RGB setting (red, green, blue), and increase/decrease the intensity of color.
14. Regularly check the product's security and safety at least every three months.
Please note that the specifications provided are typical, and actual values may slightly vary. For any further questions or concerns, it is recommended to contact your local distributor for assistance.
Add New Comment