User Manual Q&AAnswer
Jan 24, 2025 - 03:18 AM
To connect your device to the ViewSonic PJD6230 DLP Projector, follow these steps:
1. Make sure the projector and your device are powered off.
2. Identify the type of video output port on your device (e.g., HDMI, VGA, DVI).
3. Connect one end of the appropriate video cable (HDMI, VGA, DVI) to the corresponding video output port on your device.
4. Connect the other end of the video cable to the corresponding input port on the projector. The PJD6230 projector offers various input ports, including HDMI, VGA, S-Video, and Composite.
5. If you are using an HDMI connection, ensure that the HDMI cable supports HDCP (High-bandwidth Digital Content Protection) if your content is protected by HDCP.
6. Once the connections are made, power on both the projector and your device.
7. Use the projector's remote control or the control panel buttons to select the appropriate input source. The projector will display the connected device's content.
For more detailed instructions and illustrations, please refer to the ViewSonic PJD6230 DLP Projector User Guide, specifically the sections on "Connecting Video Sources" and "Using the Projector." You can access the user guide using the provided link.
Add New Comment