Answer

Jan 24, 2025 - 03:16 AM
Installation of the HILTI Firestop Rectangular Cable Collar CFS-RCC is a straightforward process. Here are the steps to follow:
1. Prepare the opening: Ensure that the opening in the floor or wall is clean and free from any debris or loose materials.
2. Insert the cables: Insert the cables, conduits, cable trays, or pipes through the opening.
3. Position the collar: Place the CFS-RCC firestop cable collar around the cables, ensuring that it fits snugly against the surface of the floor or wall.
4. Secure the collar: Use the provided screws to secure the collar in place. Make sure to tighten the screws evenly to ensure a secure fit.
5. Seal the gaps: If there are any gaps between the collar and the cables, use the Hilti Firestop Filler Mastic CFS-FIL to fill them. Apply the mastic using a Hilti dispenser for precise application.
6. Inspect and test: Once the installation is complete, visually inspect the collar to ensure it is properly installed. You can also perform a smoke or fire test to verify its effectiveness.
Please refer to the HILTI Firestop Rectangular Cable Collar CFS-RCC Instruction Manual for more detailed instructions, including specific guidelines for different applications and additional information on the product's features and advantages.
Add New Comment