User Manual Q&AAnswer
Jan 24, 2025 - 03:02 AM
To connect your device to the ViewSonic PG707W DLP Projector, follow these steps:
1. Make sure your device and the projector are powered off.
2. Locate the appropriate video output port on your device. This could be an HDMI, VGA, or USB-C port, depending on your device.
3. Connect one end of the appropriate video cable (HDMI, VGA, or USB-C) to the video output port on your device.
4. Locate the corresponding video input port on the projector. The PG707W offers HDMI, VGA, and USB-C input ports.
5. Connect the other end of the video cable to the video input port on the projector.
6. Power on your device and the projector.
7. On the projector's remote control, press the "Source" button to select the input source corresponding to the video input port you connected to (e.g., HDMI, VGA, or USB-C).
8. The projector should now display the content from your device.
For more detailed instructions and illustrations, please refer to the ViewSonic PG707W DLP Projector User Guide provided in the link above.
Add New Comment