User Manual Q&AAnswer
Jan 24, 2025 - 03:01 AM
To connect your NEC VT580 Portable Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer. The VT580 projector supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is labeled "Computer 1" for VGA and "HDMI" for HDMI.
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer and the projector.
7. Press the "Input" button on the projector's control panel or remote control to select the input source. Choose "Computer 1" for VGA or "HDMI" for HDMI.
8. Adjust the projector's focus and zoom if necessary.
For more detailed instructions and troubleshooting tips, refer to the NEC VT580 Portable Projector User's Manual, specifically the "Connecting the Projector" section.
Add New Comment