User Manual Q&AAnswer
Jan 24, 2025 - 02:54 AM
To assemble the FURNITURE WF290140 Bunk Bed with Ladder and Wheels, please follow the step-by-step assembly instructions provided in the instruction manual. Here is a general overview of the assembly process:
1. Place all parts on a clean and smooth surface, such as a rug or carpet, to avoid scratching the parts.
2. Before you begin, make sure to read and follow the assembly instructions carefully.
3. Start by identifying all the parts listed in the part list and hardware list provided in the manual.
4. Ensure that you have all the necessary tools and hardware required for assembly.
5. Begin assembling the bed frame by following the detailed instructions provided in the manual. It is important to not tighten all screws and bolts until the bed is fully set up.
6. Pay attention to safety warnings and guidelines mentioned in the manual. For example, ensure that the surface of the mattress is at least 5" below the upper edge of the guardrails for safety.
7. Use the ladder provided for entering and leaving the upper bunk.
8. Always use guardrails on both long sides of the upper bunk and ensure that they are properly installed and secure.
9. If the bunk bed will be placed next to a wall, make sure to position the guardrail that runs the full length of the bed against the wall to prevent entrapment.
10. Do not allow children under 6 years of age to use the upper bunk and always check that all components are in their proper position, free from damage, and that all connectors are tight.
11. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts if needed.
12. Keep these instructions for future reference and prohibit more than one person on the upper bunk.
For more detailed instructions and illustrations, please refer to the complete instruction manual provided with the FURNITURE WF290140 Bunk Bed with Ladder and Wheels.
Add New Comment