User Manual Q&AAnswer
Jan 24, 2025 - 02:52 AM
Loading a filmstrip into the Dukane 28A33 Film Strip Projector is a simple process. Here are the steps to follow:
1. Make sure the projector is turned off and unplugged from the power source.
2. Locate the filmstrip holder on the projector. It is usually a rectangular tray or slot located near the lens.
3. Open the filmstrip holder by gently sliding or lifting the cover.
4. Take the filmstrip and align the first frame with the filmstrip guide on the holder. The filmstrip guide is a small protrusion or groove that helps align the filmstrip.
5. Insert the filmstrip into the holder, making sure it is properly aligned with the guide.
6. Close the filmstrip holder cover, ensuring it is securely latched or locked in place.
7. Plug in the projector and turn it on.
8. Use the button controls on the projector or the included remote control to advance the filmstrip and adjust the focus as needed.
Note: Refer to the user manual for specific instructions and illustrations on loading the filmstrip into the Dukane 28A33 Film Strip Projector.
Add New Comment