User Manual Q&AAnswer
Jan 24, 2025 - 02:51 AM
To assemble the Honeywell HYF500E High Velocity Oscillating Air Circulator 2 Fans in 1, follow these steps:
1. Base Assembly:
a. Align the front and back base pieces and push them together until they snap securely.
2. Securing the Tower Fan to the Base:
a. Remove the locking nut from the base of the housing and set it aside.
b. Lift the fan housing and pass the power cord through the center of the base.
c. Lower the fan housing into the base.
d. Take the locking nut and place the power cord through it. Move the nut up inside the base and attach it to the fan housing by turning it clockwise until fully tightened.
e. Choose which side of the base the fan cord will exit from, based on the proximity to your outlet.
3. Important Safety Instructions:
- Read through all the instructions before using the appliance.
- This appliance is only designed for indoor use.
- Unwind the power cord completely to avoid overheating and fire hazard.
- Do not tug at the power cord to disconnect the plug and do not touch the power cord with wet hands.
- Always switch off and disconnect the power plug when the appliance is not in use or during transport.
- If the supply cord is damaged, it must be replaced by the manufacturer or a qualified person.
- Never touch the unit with wet hands.
For more detailed instructions and safety information, please refer to the instruction manual provided with the product.
Add New Comment