User Manual Q&AAnswer
Jan 24, 2025 - 02:27 AM
To connect your device to the InFocus in122 DLP Projector, follow these steps:
1. Check the available ports on the projector. The in122 DLP Projector has various input ports, including VGA, HDMI, S-Video, and Composite Video.
2. Identify the output port on your device. Depending on the device you are connecting, it may have a VGA, HDMI, or other compatible output port.
3. Use the appropriate cable to connect your device to the projector. For example, if your device has a VGA output port, use a VGA cable. If it has an HDMI output port, use an HDMI cable.
4. Plug one end of the cable into the corresponding output port on your device and the other end into the corresponding input port on the projector. Make sure the connections are secure.
5. Turn on your device and the projector.
6. On the projector remote control or control panel, select the input source that matches the port you connected your device to. For example, if you connected your device using the VGA port, select the VGA input source.
7. Adjust the projector settings if necessary. You can refer to the InFocus in122 DLP Projector User Manual for detailed instructions on adjusting settings such as resolution, aspect ratio, and keystone correction.
8. Once the connection is established and the settings are adjusted, you should see the content from your device displayed on the projector screen.
Note: The specific steps may vary slightly depending on the device you are connecting and the cable you are using. It is recommended to refer to the InFocus in122 DLP Projector User Manual for more detailed instructions and troubleshooting tips.
Add New Comment