User Manual Q&AAnswer
Jan 24, 2025 - 02:17 AM
To connect your laptop to the NEC NP610S Portable LCD Projector, you will need to use a VGA cable. Here are the steps to follow:
1. Make sure both your laptop and the projector are turned off.
2. Locate the VGA output port on your laptop. It is usually labeled as "VGA" or "RGB" and looks like a trapezoid-shaped connector with three rows of pins.
3. Connect one end of the VGA cable to the VGA output port on your laptop.
4. Locate the VGA input port on the projector. It is usually labeled as "Computer In" or "RGB In" and also looks like a trapezoid-shaped connector.
5. Connect the other end of the VGA cable to the VGA input port on the projector.
6. Turn on your laptop and the projector.
7. On your laptop, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Graphics options."
8. In the display settings, select the option to extend or duplicate your laptop's display to the projector. This may vary depending on your operating system.
9. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the NEC NP610S Portable LCD Projector.
Add New Comment