User Manual Q&AAnswer
Jan 24, 2025 - 02:14 AM
To install the etac Cloo Toilet Seat, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by ensuring that you have all the necessary parts for installation. Refer to the "Parts" section of the manual to confirm.
2. Measure the dimensions of your toilet seat to ensure compatibility with the etac Cloo Toilet Seat. Refer to the "Dimensions" section of the manual for exact measurements.
3. Position the etac Cloo Toilet Seat on your toilet bowl, making sure it is centered and aligned properly. The red dot on the seat should be pointing forwards.
4. Securely anchor the toilet seat raiser to the toilet bowl using the appropriate screws and attachments. Refer to the "Installation" section of the manual for detailed instructions on how to mount the product.
5. If you are using arm supports, attach them to the etac Cloo Toilet Seat according to the instructions provided in the "Accessories" section of the manual.
6. Once installed, ensure that the seat ring is securely in place. It can be removed for cleaning purposes but should click back into place completely when refitting.
7. To clean the product, use a solvent-free cleaning agent with a pH level between 5 and 9, or a 70% disinfectant solution. Avoid using harsh chemicals that may damage the product. Refer to the "General Information" section of the manual for cleaning instructions.
8. If required, the etac Cloo Toilet Seat can be decontaminated at a maximum temperature of 85°C. However, this is only necessary if specifically required.
9. Regularly check the xxxx attachment to ensure it remains secure and tighten if necessary. This will help maintain the stability and safety of the toilet seat raiser.
If you have any further questions or need additional assistance, please refer to the complete etac Cloo Toilet Seat Instruction Manual available at www.etac.com or contact your local dealer for support.
Add New Comment