User Manual Q&AAnswer
Jan 24, 2025 - 02:09 AM
To adjust the focus on the Cei World OP-012-SH Overhead Projector, follow these steps:
1. Start by turning on the projector and allowing it to warm up for a few minutes.
2. Place your document or picture on the flat surface of the projector.
3. Adjust the position of the projector and the distance from the screen until you achieve the desired image size.
4. Look for the focus adjustment xxxx or lever on the projector. It is usually located on the side or front of the projector.
5. Gradually turn the focus adjustment xxxx or move the lever to sharpen the image. Start with small adjustments and observe the changes on the screen.
6. Continue adjusting the focus until you achieve a clear and sharp image.
Note: If the image still appears blurry after adjusting the focus, make sure that the lens is clean and free from dust or smudges. Use a soft, lint-free cloth to gently clean the lens if necessary.
For more detailed instructions and illustrations, please refer to the Cei World OP-012-SH Overhead Projector Instructions Manual.
Add New Comment