User Manual Q&AAnswer
Jan 24, 2025 - 02:07 AM
To connect your Optoma EX532 Multimedia DLP Projector to your computer, please follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector. The EX532 projector supports both VGA and HDMI connections.
3. If you are using a VGA connection, connect one end of the VGA cable to the VGA port on your computer and the other end to the VGA port on the projector. Make sure the connectors are securely plugged in.
4. If you are using an HDMI connection, connect one end of the HDMI cable to the HDMI port on your computer and the other end to the HDMI port on the projector. Again, ensure the connectors are firmly inserted.
5. Once the cables are connected, power on your computer and projector.
6. On your computer, go to the display settings. In Windows, you can right-click on the desktop and select "Display settings" or "Screen resolution." On a Mac, go to "System Preferences" and click on "Displays."
7. In the display settings, select the option to extend or duplicate your desktop to the projector. This will allow you to see your computer screen on the projector.
8. Adjust the projector settings, if necessary, using the projector's remote control or the control buttons on the projector itself. You can refer to the user manual for detailed instructions on adjusting settings such as brightness, contrast, and keystone correction.
9. You should now see your computer screen projected onto the projector. If not, make sure the input source on the projector is set correctly to match the connection you used (VGA or HDMI).
For more detailed instructions and troubleshooting tips, please refer to the Optoma EX532 Multimedia DLP Projector User Manual provided in the link you provided.
Add New Comment