How do I set up and install the LevelOne FCS-5103 HUBBLE Zoom IP Camera? (levelone FCS-5103 HUBBLE Zoom IP Camera Owner's Manual)

Answer

manuals.plus

Jan 24, 2025 - 02:00 AM

To set up and install the LevelOne FCS-5103 HUBBLE Zoom IP Camera, follow these steps:

1. Mount the camera: Choose a suitable location for mounting the camera outdoors. Ensure that it is securely fastened to a wall or ceiling using the provided xxxx kit.

2. Connect the camera: Connect the camera to your network using a Cat.5 cable. The camera supports Power over Ethernet (PoE), so you can use a PoE switch or injector to provide power and data transmission through a single cable.

3. Configure the camera: Access the camera's web interface by entering its IP address in a web browser. The default IP address can be found in the Quick Installation Guide or the Resource CD. Log in using the default username and password (also provided in the documentation).

4. Set up network settings: In the camera's web interface, navigate to the network settings section. Here, you can configure the camera's IP address, subnet mask, gateway, and DNS settings to match your network configuration.

5. Adjust camera settings: Customize the camera settings according to your preferences. You can adjust parameters such as image quality, resolution, frame rate, and video compression format (H.264, H.265, or MJPEG).

6. Test and monitor: Once the camera is configured, you can test its functionality by accessing the live video feed through the web interface or a compatible video management software. Ensure that the camera is capturing clear images and that the infrared LEDs for night viewing are functioning properly.

For more detailed instructions and troubleshooting information, refer to the LevelOne FCS-5103 HUBBLE Zoom IP Camera Owner's Manual provided in the Resource CD.