User Manual Q&AAnswer
Jan 24, 2025 - 01:55 AM
To install and configure the CONCEPTRONIC POR-0103 PoE+ Repeater 2 Ports LevelOne, follow these steps:
1. Ensure that you have the necessary equipment: the POR-0103 PoE+ Repeater, Ethernet cables, and PoE devices (such as WLAN Access Points or Network Cameras).
2. Connect one end of an Ethernet cable to your network switch or router, and connect the other end to the "PoE In" port on the POR-0103.
3. Connect one end of another Ethernet cable to the "PoE Out" port on the POR-0103, and connect the other end to the PoE device you want to extend the network to.
4. Repeat step 3 for the second PoE device you want to connect.
5. Make sure that the POR-0103 is receiving power through the PoE In port. The "Power" indicator on the device should be lit.
6. Once the connections are made, the POR-0103 will automatically detect and provide power to the connected PoE devices.
7. The POR-0103 does not require any additional configuration. It is a plug-and-play device, meaning it will start working as soon as the connections are made.
8. You can repeat this installation process for additional POR-0103 units to further extend your PoE network.
Please refer to the POR-0103 Quick Installation Guide for visual instructions and additional information.
Add New Comment