User Manual Q&AAnswer
Jan 24, 2025 - 01:44 AM
To connect your Jabra Pro 925 headset to your desk phone and ensure clear audio, follow these steps:
1. Check the compatibility of your desk phone with the Jabra Pro 925 headset by referring to the Jabra Compatibility Guide.
2. Connect the base unit of the Jabra Pro 925 to your desk phone using the provided telephone cable.
3. Place the headset on the base unit and ensure it is properly docked and charging.
4. Adjust the settings for the Dial Tone Switch on the base unit to match your desk phone. The most common settings are as follows:
- Switch A: Avaya and most other phones
- Switch B: Cisco, Avaya Callmaster 5 and 6
- Switch C: Kirk Delta
- Switch D: Tenovis
- Switch E: Innovaphone
- Switch F: Other phones
- Switch G: Toshiba (most models), Dealerboards (most models including IPC and BT)
5. Position the microphone of the headset close to your mouth to maximize speech quality and noise-canceling capabilities. If the microphone is adjustable, position it approximately 1 inch from your mouth.
6. Adjust the microphone volume level on the base unit to match the audio level of your desk phone. Use the Microphone Volume Control switch on the base unit to increase or decrease the volume as needed.
By following these steps and referring to the Quick Start Guide or user manual for your Jabra Pro 925 headset, you can ensure clear audio when using the headset with your desk phone.
For more detailed instructions and troubleshooting, you can visit the Jabra Pro 925 support page at [link provided].
Add New Comment