How do I connect and configure the LevelOne FEP-1612W120 16 Port Fast Ethernet PoE Switch? (equip FEP-1612W120 Fast Ethernet PoE Switch Owner's Manual)

Answer

manuals.plus

Jan 24, 2025 - 01:38 AM


To connect and configure the LevelOne FEP-1612W120 16 Port Fast Ethernet PoE Switch, please follow the steps below:

1. Physical Connection:
   a. Connect one end of an Ethernet cable to the LAN port of your router or modem.
   b. Connect the other end of the Ethernet cable to one of the 16 Ethernet ports on the FEP-1612W120 switch.
   c. Repeat the above step for any additional devices you want to connect to the switch.

2. Power Connection:
   a. Connect the power adapter to the power input port on the switch.
   b. Plug the power adapter into a power outlet.

3. PoE Configuration (optional):
   a. If you want to use the PoE (Power over Ethernet) feature, connect your PoE-enabled devices (such as IP cameras or wireless access points) to the PoE ports on the switch.
   b. The switch will automatically detect and provide power to the connected PoE devices.

4. Configuration:
   a. Open a web browser on a computer connected to the switch.
   b. Enter the default IP address of the switch (usually 192.168.0.1) in the browser's address bar and press Enter.
   c. You will be prompted to enter a username and password. The default username is "admin" and the default password is also "admin".
   d. Once logged in, you can configure various settings of the switch, such as VLANs, QoS, and security options. Refer to the owner's manual for detailed instructions on specific configurations.

Please note that the above steps are a general guide, and the actual process may vary slightly depending on your specific network setup and requirements. For more detailed instructions and advanced configurations, please refer to the owner's manual provided with the LevelOne FEP-1612W120 switch.