User Manual Q&AAnswer
Jan 24, 2025 - 01:35 AM
To connect your Sharp XG-MB65X DLP Projector to your computer, follow these steps:
1. Make sure your computer and the projector are turned off.
2. Locate the VGA or HDMI port on your computer. If your computer has a VGA port, use a VGA cable. If it has an HDMI port, use an HDMI cable.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Press the "Input" button on the projector or the remote control to select the input source. Choose "Computer" or "HDMI," depending on the cable you used.
8. Adjust the display settings on your computer to match the projector's resolution. Refer to your computer's user manual for instructions on how to do this.
9. The projector should now display the content from your computer.
For more detailed instructions and troubleshooting tips, please refer to the user guide of the Sharp XG-MB65X DLP Projector. You can access the user guide using the link provided above.
Add New Comment