User Manual Q&AAnswer
Jan 24, 2025 - 01:33 AM
To install and set up the levelone POR-0102 2-Port PoE Repeater, follow these steps:
1. Ensure that you have a PoE switch or Power Sending Equipment (PSE) connected to your network.
2. Connect one end of an Ethernet cable to the PoE switch or PSE, and the other end to the "PoE IN" port on the POR-0102 repeater.
3. Connect another Ethernet cable from one of the "PoE OUT" ports on the POR-0102 repeater to the PoE device you want to extend the connection for.
4. If you have another PoE device that needs to be extended, you can connect it to the remaining "PoE OUT" port on the POR-0102 repeater.
5. Repeat steps 3 and 4 if you want to daisy chain multiple POR-0102 repeaters to further extend the PoE connection.
6. Once all the connections are made, power on the PoE switch or PSE.
7. The POR-0102 repeater will receive power from the PoE switch or PSE, so no additional power supply is required.
8. The PoE connection will now be extended for another 100 meters, allowing you to deploy PoE devices further away from the network control center.
Please refer to the levelone POR-0102 2-Port PoE Repeater Owner's Manual for more detailed instructions and troubleshooting information.
Add New Comment