User Manual Q&AAnswer
Jan 24, 2025 - 01:27 AM
To connect your Boxlight Seattle X30N Multi-Purpose 3LCD Projector to your computer, please follow these steps:
1. Ensure that your computer and the projector are both powered off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Power on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the projector settings, if necessary, using the projector's remote control or the control panel buttons.
For more detailed instructions and illustrations, please refer to the "Connecting Your Projector" section in the Boxlight Seattle X30N Multi-Purpose 3LCD Projector User Manual, which can be accessed using the link provided.
Add New Comment