User Manual Q&AAnswer
Jan 24, 2025 - 01:22 AM
To connect your device to the BenQ MP780ST USB DLP Projector, follow these steps:
1. Make sure your device and the projector are both powered off.
2. Locate the HDMI or VGA port on the projector. The HDMI port is labeled "HDMI" and the VGA port is labeled "Computer In".
3. Depending on the type of connection your device supports, use an HDMI cable or VGA cable to connect your device to the corresponding port on the projector.
4. If you are using an HDMI cable, connect one end to the HDMI port on your device and the other end to the HDMI port on the projector. If you are using a VGA cable, connect one end to the VGA port on your device and the other end to the VGA port on the projector.
5. Once the cables are securely connected, power on your device and the projector.
6. On the projector's remote control, press the "Source" button to select the input source corresponding to the port you connected your device to (e.g., HDMI or VGA).
7. Your device's screen should now be mirrored or extended on the projector's display. Adjust the projector's focus and other settings as needed.
For more detailed instructions and troubleshooting tips, please refer to the BenQ MP780ST USB DLP Projector User Manual provided above.
Add New Comment