User Manual Q&AAnswer
Jan 24, 2025 - 01:06 AM
To install the Levelone 650363 TV Wall Mount Bracket, please follow the steps below:
1. Start by determining the ideal location on the wall to mount your TV. Ensure that the wall can support the weight of both the bracket and the TV.
2. Use a stud finder to locate the studs in the wall. It is recommended to mount the bracket to the studs for maximum stability.
3. Once you have identified the studs, mark the desired height on the wall using a pencil.
4. Hold the wall plate against the wall at the marked height and use a level to ensure it is perfectly horizontal. Mark the positions of the mounting holes on the wall.
5. Drill pilot holes at the marked positions using an appropriate drill bit for your wall type (brick, concrete, or wood).
6. Attach the wall plate to the wall using the provided screws and wall anchors, ensuring a secure fit.
7. Next, attach the brackets to the back of your TV. The Levelone 650363 TV Wall Mount Bracket is compatible with VESA standards up to 400 x 400. Refer to your TV's manual for the VESA mounting hole pattern.
8. Carefully lift the TV and align the brackets with the corresponding holes on the wall plate. Slide the TV downwards until it locks into place.
9. Double-check that the TV is securely attached to the wall mount bracket.
10. Finally, use the integrated bubble level on the wall plate to ensure that the TV is level. Make any necessary adjustments by loosening the screws and repositioning the TV.
Please refer to the owner's manual for more detailed instructions and illustrations specific to the Levelone 650363 TV Wall Mount Bracket.
Add New Comment