User Manual Q&AAnswer
Jan 24, 2025 - 12:04 AM
To connect the Focal Sub Air subwoofer in wireless mode, follow these steps:
1. Plug the 5-volt power supply into the Sub Air transmitter.
2. Connect the low-level RCA inputs on the Sub Air transmitter. If you are using a 2-channel amplifier with pre-out line outputs, always connect using the RCA stereo Right/Left inputs.
3. Switch on the Sub Air by putting the "Power" switch into the "On" or "Standby" mode. The connection status LED should be glowing steadily, indicating that the Sub Air Transmitter and Sub Air are connected.
Note: If the connection status LED on the Sub Air and Sub Air Transmitter is flashing slowly (one flash per second), they are not synchronized. In this case, you will need to carry out the connection procedure by holding down the connection button on the Sub Air for 4 seconds, then holding down the connection button on the Sub Air Transmitter for 4 seconds within 30 seconds. The connection status LEDs on both devices will then glow steadily, indicating a successful connection.
For more detailed instructions and information on adjusting settings, refer to the "Connecting the Sub Air in wireless mode" section of the user manual.
Add New Comment