Answer

Jan 24, 2025 - 12:03 AM
To assemble the Ninja CFP301 DualBrew Pro System Coffee Maker, follow these steps:
1. Filling the Water Reservoir:
a. Remove the reservoir from the base.
b. Remove the removable latch from the back of the brewer.
c. Swing the reservoir base around the brewer until it clicks into place.
d. Rotate the removable latch 180 degrees and reinsert it in the new gap where the base was previously positioned.
2. Positioning the Water Reservoir:
a. Pull down the cup platform to set a mug on it for a cup size.
b. For travel mugs or XL sizes, place an XL Cup, Travel Mug, or XL Tumbler on the base of the brewer.
c. For carafe brewing, place the carafe on the Intelligent Warming Plate. The Intelligent Warming Plate will turn on only if brewing a carafe size on Classic or Rich brew.
3. Plug it into an outlet and turn it on.
4. Fill the water reservoir to the Full line with fresh water and place it on the base.
5. Remove the Ninja Pod Adapter and slide the Sliding Lid into the closed position.
6. Place the empty carafe under the brew basket and run a Full Carafe, Classic brew. Once the brew is complete, discard the water and you're ready to go.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment