User Manual Q&AAnswer
Jan 23, 2025 - 11:45 PM
To pair the Nokta Green Edition 2.4 GHz Wireless Headphones with your metal detector, follow the instructions below based on the specific model of your metal detector.
For SIMPLEX+:
1. Make sure your detector is turned on.
2. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
3. The headphones will emit a number of beeps to indicate the battery status.
4. The blue LED on the headphones will start blinking every 2 seconds.
5. Press the plus (+) and minus (-) buttons on your detector at the same time. You will hear a high beep.
6. The blue LED on the headphones will start blinking every second, indicating that the wireless headphones are pairing with the detector.
7. Once the pairing is successful, you can adjust the wireless connection channel by using the plus (+) and minus (-) buttons on your detector.
8. To adjust the volume, use the volume setting of the detector.
For Anfibio and Kruzer:
1. Make sure your detector is turned off.
2. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
3. The headphones will emit a number of beeps to indicate the battery status.
4. The blue LED on the headphones will start blinking every 2 seconds.
5. Turn the detector on while pressing the SETTINGS button and continue holding the button until "HP" is displayed on the screen.
6. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking every second.
7. If you experience any distortion or interference, you can change the wireless channel by selecting WIRELESS from the options and using the plus (+) and minus (-) buttons.
8. To adjust the volume, use the VOLUME setting of the detector.
For Impact & Racer Series:
1. Make sure your detector is turned off.
2. For Racer 2 & Gold Racer: Insert the dongle in the socket located on the left side of the system box.
3. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
4. The headphones will emit a number of beeps to indicate the battery status.
5. The blue LED on the headphones will start blinking every 2 seconds.
6. For Impact: Turn the detector on while pressing the EXPERT button for approximately 5-6 seconds. For Racer 2 and Gold Racer: Turn the detector on while pressing the plus (+) button for approximately 5-6 seconds.
7. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking every second.
8. If you experience any distortion or interference, you can change the wireless channel by using the trigger switch and the down button on the detector.
9. To adjust the volume, use the on-off/volume xxxx on the detector.
For INVENIO:
1. Make sure your detector is turned off.
2. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
3. The headphones will emit a number of beeps to indicate the battery status.
4. The blue LED on the headphones will start blinking every 2 seconds.
5. Turn the detector on while pressing the zoom out (-) button and continue holding the button until the green headphones icon appears on the screen.
6. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking every second.
7. If you experience any distortion or interference, you can change the wireless channel by pressing the OPTIONS button and selecting the wireless headphone channel setting.
8. To adjust the volume, use the volume setting of the detector.
For TMD-101:
1. Make sure your detector is turned off.
2. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
3. The headphones will emit a number of beeps to indicate the battery status.
4. The blue LED on the headphones will start blinking every 2 seconds.
5. Turn the detector on while pressing the sensitivity plus (+) button and continue holding the button until the wireless icon appears on the screen.
6. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking every second.
7. If you experience any distortion or interference, you can change the wireless channel by pressing the M button for 3 seconds and using the volume plus (+) and minus (-) buttons.
8. To adjust the volume, use the volume setting of the detector.
For PulseDive:
1. Make sure the PulseDive is turned off.
2. While pressing the white button on the headphones, switch the on-off button of the headphones to the "on" position and continue holding the white button until you hear a beep indicating the battery status.
3. The headphones will emit a number of beeps to indicate the battery status.
4. The blue LED on the headphones will start blinking every 2 seconds.
5. Turn the PulseDive on while pressing the Adjustment button (A). You will hear a beep.
Add New Comment