User Manual Q&AAnswer
Jan 23, 2025 - 11:34 PM
Sure! Here are the step-by-step instructions for manually installing firmware on your PURE Contour 200i Air wireless speaker:
1. Download the recovery file: Visit the Pure Downloads website on your Mac or PC and download the recovery file for your Contour 200i Air.
2. Connect the Contour 200i Air to your network router: Use an Ethernet cable to connect your Contour 200i Air to your network router. Make sure the Ethernet cable is connected to the Contour before applying mains power.
3. Apply mains power to the Contour: Plug in the power cable of the Contour 200i Air to a power outlet.
4. Wait for the LED lights: After booting up, you will see a static red LED light on the Contour. Press the standby button and wait for a constant white LED to appear.
5. Install Safari web browser: If you don't already have Safari installed on your computer, download and install the latest version from the Apple website (www.apple.com/safari/download/).
6. Open Safari and access Bonjour: Launch Safari and click on the open book 'Bookmarks' icon located in the top left-hand corner of the browser. From the drop-down menu, select 'Bonjour'. Your Contour device should be listed there.
7. Open the Setup Manager: Double-click on your Contour listing in the Bonjour menu to open the 'Setup Manager'.
8. Access the Update tab: In the Setup Manager, click on the 'Update' tab, which is located on the far right.
9. Follow on-screen instructions: Follow the on-screen instructions provided in the Setup Manager to complete the recovery process. During the manual install process, the LED on the Contour will turn amber in color. The process may take around 5-10 minutes, depending on your system, and may pause occasionally. Once the process is complete, the LED will return to a static red 'sleep/standby' status.
By following these steps, you should be able to manually install the latest firmware for your PURE Contour 200i Air wireless speaker using the Apple 'Bonjour' service.
Add New Comment