User Manual Q&AAnswer
Jan 23, 2025 - 11:29 PM
To uninstall an out-swing door from the Murphy Door Pre Hung Flush Mount, follow these steps:
1. Take pressure off the door by ensuring that the pin is vertical and the holes of the hinges are aligned.
2. Locate the hinge pin in the top of the cabinet through a 1" hole.
3. Use the hinge pin removal tool provided with the door. Put the removal tool around the pin and carefully pull the pin down while slightly wiggling the tool.
4. Once the top pin is out, you can lift the door off the bottom hinge.
Note: If you lose the pin removal tool, you can order another one from MurphyDoor.com. Taping the pin removal tool to the fixed shelf can be a simple solution.
Please refer to the Murphy Door Pre Hung Flush Mount Instruction Manual for more detailed instructions and illustrations.
Add New Comment