User Manual Q&AAnswer
Jan 23, 2025 - 10:59 PM
To install the CONCEPTRONIC CAS-7345 Corner Mount Bracket, please follow the steps below:
1. Start by selecting a suitable corner location for mounting the bracket. Ensure that the surface is sturdy and can support the weight of the bracket and the camera.
2. Use a pencil or marker to mark the positions for the xxxx holes on the wall or corner surface. Make sure to align the bracket vertically and horizontally as desired.
3. Drill pilot holes at the marked positions using an appropriate drill bit. The size of the drill bit should match the size of the screws provided with the bracket.
4. Attach the bracket to the wall or corner surface using the screws provided. Ensure that the bracket is securely fastened.
5. Once the bracket is installed, you can mount your camera onto it. Follow the instructions provided with your camera to attach it to the bracket securely.
Note: It is recommended to consult the user manual of your specific camera model for detailed instructions on attaching it to the bracket.
For any additional information or troubleshooting, please refer to the CONCEPTRONIC CAS-7345 Corner Mount Bracket User Guide that came with the product.
Add New Comment