User Manual Q&AAnswer
Jan 23, 2025 - 10:57 PM
To pair your Jabra Elite Active 65t Copper Red True Wireless Earbuds with your mobile device, please follow these steps:
1. Ensure that the earbuds are charged and turned on. If they are in the charging case, remove them.
2. On your mobile device, go to the Bluetooth settings menu and make sure Bluetooth is turned on.
3. Press and hold the Multi-function button on the right earbud for approximately 3 seconds until the LED on the earbud flashes blue. This indicates that the earbud is in pairing mode.
4. On your mobile device, you should see a list of available Bluetooth devices. Look for "Jabra Elite Active 65t" and select it to initiate the pairing process.
5. Once the pairing is successful, you will hear a voice prompt in the earbud saying "Connected" and the LED on the earbud will turn solid blue.
6. Repeat the same process for the left earbud by pressing and holding the Multi-function button on the left earbud until the LED on the earbud flashes blue. Select "Jabra Elite Active 65t" from the Bluetooth devices list on your mobile device to pair the left earbud.
7. Once both earbuds are successfully paired, they will automatically connect to your mobile device whenever they are turned on and within range.
If you are still experiencing difficulties with the pairing process, it is recommended to reset your Jabra Elite Active 65t earbuds by following the manual reset instructions provided earlier. Remember to delete the previous pairing in the Bluetooth menu of your mobile device before attempting to pair again.
For further assistance, you can refer to the user manual of your Jabra Elite Active 65t Copper Red True Wireless Earbuds or visit the Jabra support page at [https://www.jabra.in/supportpages/jabra-elite-active-65t/100-99010001-40/faq/1
4b29ba5-0f9d-41a6-ba4d-71c1f00ad589](https://www.jabra.in/supportpages/jab...).
Add New Comment