User Manual Q&AAnswer
Jan 23, 2025 - 10:51 PM
To load the media into the TSC ME340-E-LCD Metal Industrial Bar Code Printer, please follow the steps below:
1. Open the printer cover by lifting the latch on the right side of the printer.
2. Pull the media hanger to the side and place the roll of media on the hanger.
3. Adjust the media guide to match the width of the media.
4. Pull the leading edge of the media over the platen roller and under the media sensor.
5. Close the printer cover and make sure it latches securely.
For a visual demonstration of the media loading process, you can refer to the following YouTube video: [YOUTUBE='WbixzrwUdOU']
Please note that the above instructions are based on the information provided in the TSC ME340-E-LCD Metal Industrial Bar Code Printer User Manual.
Add New Comment