User Manual Q&AAnswer
Jan 23, 2025 - 10:37 PM
To connect your Jabra Biz 2300 USB C MS Duo Wired Headset to your computer, please follow these steps:
1. Make sure your computer is turned on and running.
2. Take the USB cable that came with your headset and locate the USB-C end of the cable.
3. Plug the USB-C end of the cable into the corresponding USB-C port on your Jabra Biz 2300 headset.
4. Locate an available USB port on your computer and plug the other end of the USB cable into it.
5. Wait for your computer to recognize the headset. This may take a few seconds.
6. Once the headset is recognized, you should be able to use it for audio input and output on your computer.
Note: If you are using a Jabra Link Bluetooth adapter or Jabra Link DECT adapter instead of the USB cable, follow the instructions provided with the adapter to establish the connection.
For more detailed instructions and troubleshooting, you can refer to the Jabra Biz 2300 USB C MS Duo Wired Headset manual available at the following link: [link to the manual provided in the question]
Add New Comment