User Manual Q&AAnswer
Jan 23, 2025 - 10:35 PM
To reset your Jabra Elite Active 65t Titanium Wireless Earbuds, follow these steps:
1. Make sure the earbuds are turned on and connected to your device.
2. Press and hold the Multi-function button on the right earbud for about 10 seconds until the LED light on the earbud flashes purple.
3. Release the button and wait for the earbuds to power off.
4. Once the earbuds have powered off, press and hold the Multi-function button again for about 5 seconds until the LED light flashes blue and purple.
5. Release the button and wait for the earbuds to enter pairing mode. The LED light will flash blue.
6. The earbuds have now been reset and are ready to be paired with a new device.
Note: Resetting the earbuds will remove all previously paired devices and settings. You will need to pair them again with your desired device after the reset.
For more detailed instructions and troubleshooting tips, you can refer to the official Jabra Elite Active 65t Titanium Wireless Earbuds manual provided by Jabra.
Add New Comment