How do I install the Eaton DG321UGB General Duty Non-Fusible Safety Switch? (EATON DG321UGB Non-Fusible Safety Switch Instruction Guide)

Answer

manuals.plus

Jan 23, 2025 - 10:34 PM

Installation of the Eaton DG321UGB General Duty Non-Fusible Safety Switch requires following the provided instructions and ensuring compliance with local electrical codes. Here is a step-by-step guide to help you with the installation process:

1. Safety Precautions: Before starting the installation, make sure to turn off the power supply to the circuit you will be working on. Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.

2. Mounting: Select a suitable location for the safety switch, ensuring it is easily accessible and away from any potential hazards. The switch should be mounted on a sturdy surface using appropriate mounting hardware.

3. Wiring: Ensure that the power supply is disconnected. The safety switch has three terminals labeled L1, L2, and L3 for the line side, and three terminals labeled T1, T2, and T3 for the load side. Connect the corresponding wires from the power source to the line side terminals and the wires going to the load to the load side terminals. Tighten the terminal screws securely.

4. Grounding: Connect the grounding wire to the grounding terminal provided in the safety switch. Ensure that the grounding wire is properly sized and securely connected.

5. Neutral Kit (if applicable): If you intend to use the safety switch as a service entrance switch, you will need to install a neutral kit. Refer to the instructions provided with the neutral kit for proper installation.

6. Enclosure: Close and secure the enclosure cover using the provided screws. Ensure that the cover is properly sealed to protect against dust and moisture.

7. Power On: Double-check all connections and ensure that the power supply is still turned off. Once you are confident in the installation, restore power to the circuit and test the switch to ensure it is functioning correctly.

Please note that this is a general guide, and it is essential to refer to the specific instructions provided in the Eaton DG321UGB General Duty Non-Fusible Safety Switch manual for detailed installation steps and any additional requirements or precautions.