User Manual Q&AAnswer
Jan 23, 2025 - 09:45 PM
To install the Fein CG13-125V Angle Grinder, follow these steps:
1. Ensure that the power tool is unplugged and the switch is in the "OFF" position.
2. Attach the desired accessory, such as a grinding disc or cutting disc, to the spindle of the angle grinder. Make sure the accessory is securely fastened.
3. If using a wheel guard, select the appropriate type (A or B) for your application and attach it to the angle grinder. Type A is for cutting, while Type B is for grinding.
4. If using a backing pad for sanding, attach it to the spindle and secure it with the provided clamping unit.
5. If using a wire brush or cup brush, attach it to the spindle and secure it with a fitting open-end spanner.
6. Once all accessories are properly installed, you can proceed with using the angle grinder.
Please refer to the Fein CG13-125V Angle Grinder's Instruction Manual for more detailed instructions and safety precautions.
Add New Comment