User Manual Q&AAnswer
Jan 23, 2025 - 09:26 PM
To use the CONCEPTRONIC 129403 Universal Crimping Tool to crimp modular connectors, please follow the steps below:
1. Prepare the cable: Strip off the outer insulation of the cable using the stripping function of the crimping tool. Make sure to expose the required length of the inner wires.
2. Untwist and arrange the inner wires: Separate and untwist the inner wires of the cable. Arrange them in the correct order according to the wiring scheme required for your connector type (6P4C/RJ11, 6P6C/RJ12, or 8P8C/RJ45).
3. Insert the connector: Insert the prepared cable into the connector, ensuring that the wires are fully inserted into the correct slots.
4. Crimp the connector: Place the connector with the cable into the crimping tool, aligning it with the appropriate crimping slot for your connector type. Apply firm pressure to the handles of the crimping tool to crimp the connector onto the cable. Make sure the crimping process is completed smoothly.
5. Check the crimp: After crimping, visually inspect the connector to ensure that all the wires are securely crimped and properly positioned within the connector slots.
Please note that the specific wiring scheme for your connector type may vary depending on the application or network standard you are working with. Refer to the documentation or guidelines provided with your connector or consult a professional if you are unsure about the correct wiring scheme.
For further information or detailed instructions, please refer to the user manual of the CONCEPTRONIC 129403 Universal Crimping Tool.
Add New Comment