User Manual Q&AAnswer
Jan 23, 2025 - 09:20 PM
To connect the Jabra Evolve2 85 Wireless Stereo Headset to your device, please follow these steps:
1. Ensure that your headset is charged. Connect the included USB cable to the headset and plug the other end into a power source or computer. The LED light on the headset will turn solid green when fully charged.
2. Turn on your headset by pressing and holding the power button located on the right earcup until the LED light flashes blue.
3. On your device, enable Bluetooth and make sure it is discoverable.
4. On the Jabra Evolve2 85 headset, press and hold the Bluetooth button located on the right earcup until the LED light flashes blue and white. This puts the headset into pairing mode.
5. On your device, search for Bluetooth devices. You should see "Jabra Evolve2 85" in the list of available devices. Select it to pair.
6. If prompted, enter the PIN code "0000" to complete the pairing process.
7. Once connected, the LED light on the headset will turn solid blue, indicating a successful connection.
8. You can now use the Jabra Evolve2 85 Wireless Stereo Headset for calls and listening to music. Adjust the volume using the volume buttons on the right earcup and answer/end calls using the multifunction button.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the headset or visit the Jabra support page at [insert support page link].
Add New Comment