User Manual Q&AAnswer
Jan 23, 2025 - 09:14 PM
To wire the EATON ECH2411BHB Freedom NEMA Motor Control starter, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that the power supply to the motor control starter is turned off.
2. Identify the coil voltage required for your application. The ECH2411BHB has a coil voltage of 240/120V.
3. Connect the power supply wires to the L1 and L2 terminals on the motor control starter.
4. Connect the motor wires to the T1 and T2 terminals on the motor control starter.
5. If using a HAND/OFF/AUTO pilot device, refer to the wiring diagram in the manual to connect it to the appropriate terminals on the motor control starter.
6. If using a control power transformer, refer to the wiring diagram in the manual to connect it to the appropriate terminals on the motor control starter.
7. Double-check all connections to ensure they are secure and properly tightened.
8. Once all wiring is complete, you can turn on the power supply to the motor control starter.
Please note that these instructions are a general guide, and it is important to refer to the specific wiring diagram and instructions provided in the manual for your EATON ECH2411BHB Freedom NEMA Motor Control starter.
Add New Comment