User Manual Q&AAnswer
Jan 23, 2025 - 09:11 PM
To pair your Jabra Evolve2 65 USB A UC Mono Wireless Headset with your device, please follow these steps:
1. Ensure that your headset is charged and turned on.
2. On your device, go to the Bluetooth settings menu.
3. Enable Bluetooth if it is not already turned on.
4. Put your Jabra Evolve2 65 headset into pairing mode by pressing and holding the Bluetooth button on the right earcup until the LED light starts flashing blue.
5. On your device, select the Jabra Evolve2 65 from the list of available Bluetooth devices.
6. If prompted, enter the PIN code 0000 to complete the pairing process.
7. Once the pairing is successful, the LED light on the headset will turn solid blue.
Note: If you have previously paired the headset with another device, make sure to disconnect or unpair it before attempting to pair it with a new device.
For more detailed instructions or troubleshooting tips, you can refer to the user manual provided with your Jabra Evolve2 65 headset or visit the Jabra support website.
Add New Comment