User Manual Q&AAnswer
Jan 23, 2025 - 09:05 PM
Sure! Here are the step-by-step instructions to pair your Jabra Engage 55 USB C UC Mono Wireless Headset with your device:
1. Make sure your headset is charged and turned on.
2. On your device, go to the Bluetooth settings.
3. Enable Bluetooth if it is not already enabled.
4. Put your Jabra Engage 55 headset into pairing mode by pressing and holding the Bluetooth button on the base until the Bluetooth LED starts flashing blue.
5. On your device, search for available Bluetooth devices.
6. Select "Jabra Engage 55" from the list of available devices.
7. If prompted, enter the PIN code "0000" to complete the pairing process.
8. Once the pairing is successful, the Bluetooth LED on the base will turn solid blue.
Please note that these instructions are general guidelines, and the exact steps may vary depending on your specific device and operating system. For more detailed instructions, please refer to the user manual of your Jabra Engage 55 USB C UC Mono Wireless Headset.
Add New Comment