How do I pair my Jabra Evolve 65 UC Stereo Wireless Headset with multiple devices simultaneously? (Jabra Evolve 65 Wireless Headset Instruction Guide)

Answer

manuals.plus

Jan 23, 2025 - 08:51 PM

To pair your Jabra Evolve 65 UC Stereo Wireless Headset with multiple devices simultaneously, follow these steps:

1. Ensure that your Jabra headset is in pairing mode. You can activate pairing mode by pressing and holding the Bluetooth button on the headset until the LED light starts flashing blue.

2. On the first device you want to pair, enable Bluetooth and search for available devices. Select "Jabra Evolve 65" from the list of available devices.

3. Once the first device is successfully paired, turn off Bluetooth on the device.

4. Repeat steps 2 and 3 for the second device you want to pair.

5. After both devices are paired individually, turn on Bluetooth on the first device again. It should automatically connect to your Jabra headset.

6. To connect the second device, press the Bluetooth button on the headset twice quickly. The LED light will flash blue and white, indicating that it is searching for the second device. Enable Bluetooth on the second device and select "Jabra Evolve 65" from the list of available devices.

7. Once the second device is connected, you can switch between the two devices by pausing audio playback on one device and starting it on the other. The headset will automatically switch the audio connection.

Note: The Jabra Evolve 65 UC Stereo Wireless Headset can connect to a maximum of two devices simultaneously. However, it can only play audio from one device at a time. If you want to connect a third device, it will replace the device that was first paired.